t_seriest

Technical Specifications

Dimensions

Head Dia.
1.3 inches (33 mm)
Body Dia.
1.0 inch (25.4 mm)
Length:
5.7 inches (146 mm)
Weight:
4.6 ounces (130 grams)1

Battery Type

  • 2xCR123A, 2xRCR123A, or 1x18650 li-ion2
  • 3xCR123A, or 3xRCR123A li-ion3
  • 4xCR123A, or 2x18650 li-ion4
  • Compatible battery diameter/length
    • 123A: (16-16.8mm/34-34.5mm)
    • 18650: (18-18.8mm/67-68.5mm)
  • Read battery safety precaution

Operating voltage

  • 2.7V - 12V

Body color

  • Black (HAIII)

What's included

  • Stainless steel bezel (removable)
  • Spare O-rings
  • Titanium coated Stainless steel pocket clip
  • User manual
  • Soft cigar holding grip
  • Cigar grip cover ring
  • Lanyard ring attachment ring
  • Heavy duty nylon holsterw/ self-retention device and flip
  • Mil-Spec paracord lanyard w/ quick attachment clip

All models

  • Base model
    • Includes everything listed in "what's included" section above.
  • Filter & Extended Tube Kit
    • Includes everything in base model, plus:
    • ET28 diffuser filter, ET28 yellow filter, ET28 red filter, ET28 green filter, ET28 blue filter
    • 3 cells extension body tube for three CR123A/RCR123A
    • 4 cells extension body tube for four CR123A or two 18650 li-ion
  • Weapon Kit
    • Includes everything in base model, plus:
    • Remote Pressure switch w/ separate forward clicky on/off switch
    • Choose pressure switch wiring from:
      • i) standard 8" coiled cord for rifle
      ii) 5.5" coiled cord for shotgun
      iii) 7" straight cord for rifle

    • Aluminum Weapon Rail Mount for 1" Body
    • Velcro double sided tape

LED drop-in modules regular beam

  • Nichia 219C CRI-92 D240 R9050 SW45 LED Dropin
  • CREE XHP35 HD E4 Cool White LED Dropin
  • CREE XHP35 HD Neutral White LED Dropin
  • CREE XHP35 HI E2 Cool White LED Dropin
  • CREE XHP35 HI Neutral White LED Dropin
  • UV 365nm dropin (Ledengin LZ1-00UV00, 1360mW radiant flux, 2levels)
  • UV 395nm dropin (Ledengin LZ1-00UA00, 1400mW radiant flux, 2levels)
  • IR 850nm dropin (Osram 640mW radiant flux, 2levels)
  • IR 940nm dropin (Osram 600mW radiant flux, 2levels)
  • Red color LED dropin (CREE XP-E2 Color, 2levels, 9,000 lux, 208yards/190meters)
  • Green color LED dropin (CREE XP-E2 Color, 2levels, 11,500 lux, 234yards/214meters)
  • Blue color LED dropin (CREE XP-E Color, 2levels)
  • Custom high power 395nm UV LED (5Watts 2000mW)
  • Custom high power 365nm UV LED (5Watts 1400mW)
  • CREE XP-L HI V3 Cool White LED Dropin
  • CREE XP-L HI Neutral White LED Dropin

LED drop-in modules floody beam

  • Nichia 219C CRI-92 D240 R9050 SW45 LED Dropin
  • Multi-color (White/Red/Royal Blue/Green) dropin (CREE XM-L Color, D25LC2 color driver)
  • Triple high CRI-92 neutral white LED dropin
    1000 LED lumen
    (3*Nichia 219B LED SW45,T25C2 driver)
  • Triple cool white LED dropin
    1317 LED lumen
    (3*CREE XP-G2 S2 LED, T25C2 driver)
  • Triple Red Color LED dropin (3*CREE XP-E RED LED, T25C2 driver, 1500 lux, 85yards/77meters)
  • Triple Green Color LED dropin (3*CREE XP-E Green LED, T25C2 driver, 3000 lux, 120yards/110meters)
  • Triple Blue Color LED dropin (3*CREE XP-E Blue LED, T25C2 driver)

LED

  • CREE XM-L2 U4 LED (Cool White)
  • CREE XP-L HD V6 LED (Cool White)
  • CREE XP-L HI V3 LED (Cool White)
  • Nichia 219C CRI-92 D240 R9050 SW45 LED (Neutral White)

Max output

  • CREE XM-L2 U4:
    • LED lumen: 1350
    • ANSI FL-16 lumen: 1105
  • CREE XP-L HD V6:
    • LED lumen: 1338
    • ANSI FL-16 lumen: 1080
  • CREE XP-L HI V3:
    • LED lumen: 1148
    • ANSI FL-16 lumen: 992
  • Nichia 219C D240 CRI92 (Single LED):
    • LED lumen: 800
    • ANSI FL-16 lumen: 650
  • Nichia 219C D240 CRI92 (Triple LED):
    • LED lumen: 1100
    • ANSI FL-16 lumen: 860

Beam Profile

  • CREE XM-L2 U4 LED
    • Center lux: 18,900 lux7
    • Center spot angle: 6.9°
    • Spill light angle: 54°
    • Beam distance: 300 yards / 275 meters

  • CREE XP-L HD V5 LED
    • Center lux: 18,900 lux7
    • Center spot angle: 7.4°
    • Spill light angle: 52°
    • Beam distance: 301 yards / 275 meters

  • CREE XP-L HI V3 LED
    • Center lux: 33,100 lux7
    • Center spot angle: 5.2°
    • Spill light angle: 50°
    • Beam distance: 396 yards / 363 meters
  • Nichia 219C D240 CRI92 (Single LED):
    • Center lux: x lux7
    • Center spot angle: x°
    • Spill light angle: x°
    • Beam distance: x yards / x meters
  • Nichia 219C D240 CRI92 (Triple LED):
    • Center lux: x lux7
    • Center spot angle: x°
    • Spill light angle: x°
    • Beam distance: x yards / x meters
  • CREE XP-L HD V6 LED
    • Center lux: 15400 lux7
    • Center spot angle: 6.9°
    • Spill light angle: 53°
    • Beam distance: 271 yards / 248 meters

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

Circuit

  • C3300 Extreme3
    • Synchronous buck w/ efficiency of up to 95%
    • Non-dimming constant current regulation for all output levels without flicking
    • Low dropout voltage, enable circuit to current regulate even with a single 18650 for most of the runtime at turbo output.
    • Low battery voltage warning12
    • Turbo boost technology

Reflector

  • Smooth aluminum reflector

Material

  • HAIII hard anodization aerospace aluminum

Waterproof

  • IPX-8 standard

Carrying method

  • Titanium coated stainless steel pocket clip
  • paracord lanyard with detachable lanyard holder
  • Rigid nylon holster w/ self retention device and flip

Other features

  • Upgradable LED and driver drop-in module
  • User replaceable glass lens
  • Tactical rubber cigar grip (replaceable with grip cover)
  • Battery reverse polarity protection
  • User removable pocket clip
  • Tail stand ability with included tail stand boot
  • Tailcap battery stabilizer design to prevent battery movement inside the battery tube

Replaceable items

  • LED drop-in module
  • Lens
  • Switch module

Output and Runtime

  • Regular mode (3+1 brightness levels)
    • Led lumen
      • XM-L2 U4:
        135010-1042/614/115/9
      • XP-L HD V6:
        133810-1032/608/111/9
      • XP-L HI V3:
        114810-882/520/97/8
      • 1 x Nichia 219C CRI92:
        80010-620/370/70/6
      • 3 x Nichia 219C CRI92:
        110010-850/500/95/8
    • ANSI FL-1 lumen
      • XM-L2 U4:
        110511-854/504/97/8
      • XP-L HD V6:
        108011-835/492/95/8
      • XP-L HI V3:
        99211-764/450/87/7
      • 1 x Nichia 219C CRI92:
        65010-510/300/60/5
      • 3 x Nichia 219C CRI92:
        86010-670/400/75/6
    • Runtime:
      • 1/2.1/13/100+ hours (2xCR123A)
      1.8/3.3/21/150+ hours (1x18650)
  • Tactical mode (Two brightness levels + strobe)
    • Led lumen
      • XM-L2 U4: 135010/392/Strobe I
      • XP-L HD V6: 133810/387/Strobe I
      • XP-L HI V3: 114810/330/Strobe I
      • 1 x Nichia 219C CRI92:
        80010/235/Strobe I
      • 3 x Nichia 219C CRI92:
        110010/320/Strobe I
    • ANSI FL-1 lumen
      • XM-L2 U4: 110510/323/Strobe I
      • XP-L HD V6: 108011/315/Strobe I
      • XP-L HI V3: 99211/288/Strobe I
      • 1 x Nichia 219C CRI92:
        65010/195/Strobe I
      • 3 x Nichia 219C CRI92:
        86010/255/Strobe I
    • Runtime:
      • 1/3.7 hours (2xCR123A)
      1.8/5.7 hours (1x18650)
  • Seven hidden auxiliary outputs
    • Strobe/Disorienting strobe/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)9
  • See other battery type runtime here.

Operations

  • Tactical forward clicky switch
  • Basic
    • Turn on the light by pressing the tailcap button until it clicks.
    • Twist the head to select between three output levels.
    • To access the lowest 4th level, turn the head to 3rd level, then 2nd level, and then back to 3rd level within one second.
    • You can pre-selected output level before turning on the light.


  • Advanced
    • Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.

    • Switching between regular mode and tactical mode (default): Switch to 2nd output level and turn the flashlight on and off for 20 times.
    • Tail strobe feature (off by default): With this enabled, you can access strobe output at the tailcap switch button . To enable (or disable) this function (disable from factory), switch to 1st level and turn the flashlight on and off 20 times (one second or less between each click). With the tailcap strobe setting enabled, a double press of the switch button (within one second) will activate the strobe output.
    • Energy saving feature (on by default): T25C2 reduces output by 24% after 200 seconds at turbo mode. With this feature turned off, T25C2 reduces output by 8% instead. To toggle this feature, twist the head to 3rd level and turn the flashlight on and off for 20 times. Once setting has been changed, LED will output 3 seconds at 100% (enable), or 1 second at 100% (disable).

Controls

Warranty & Maintenance

  • Ten years performance guaranteed warranty
  • Proper maintenance goes a long way to ensure your light to serve in the toughest environment and years to come.
  • Read below to how to keep your T25C2 in top shape.

Battery Safety Precaution

All EAGTAC flashlights are designed to use “button-top?battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loose the tail-cap to reduce the internal pressure and replace all batteries.     Back to top

Flashlight Maintenance

Cleaning: Periodically clean the thread and o-rings with a lint free cloth. Clean the battery contact, signal contact, thread, and body contact (conductive aluminum area) with a lint free cloth. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently

Lubing: Apply a thin coating of EAGTAC silicon-based lubricant to the o-rings (not the machined thread)and use a small drop of Deoxit red cleaner solution (D series) to slightly lube them for better conductivity and smoother mode switching experience.     Back to top

Other battery types runtime

T25C2 allows users to use different type of batteries in standard configuration. With added extension tube, you get extra runtime and extra output at turbo mode with energy saving mode turned off. Below lists the turbo output runtime with different battery types:

w/ energy saving disabled
2xCR123A 0.6hr, 1x18650 1.3hr, 3xCR123A 1.2hr, 3xRCR123A 0.7hr, 4xCR123A 1.6hr, 2x18650 2.5hr

w/ energy saving enabled
2xCR123A 1hr, 1x18650 1.8hr, 3xCR123A 1.5hr, 3xRCR123A 0.9hr, 4xCR123A 2.2hr, 2x18650 3.3hr

* Above runtime is tested based on EAGTAC 1500mAh CR123A batteries, EAGTAC 750mAh RCR123A batteries and EAGTAC 3400mAh 18650 batteries.
** 3x(R)CR123A are tested with 3cell extender tube, 4xCR123A and 2x18650 are tested with 4cell extender tube. Top
  1. Weight excluding battery
  2. All batteries must have protruding top button. All rechargeable li-ion batteries (e.g. RCR123A and 18650) should be equipped with internal protection circuit against over-charge,over-discharge, and short circuit.
  3. Uses 3 cells body extender
  4. Uses 4 cells body extender
  5. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight. For O.T.F. lumen, measurement is taken one minute after turning on the flashlight.
  6. Beam output diameter taken at one meter
  7. This measurement is taken with energy saving feature (on by default) and with two CR123A. User can disable or enable this energy saving feature. We recommend leaving this feature on when you are using two CR123A. When using 18650 or three or more CR123A, you can consider turning off the energy saving feature for more output. With this features turned off, T25C2 operates at higher temperature. User can hold the flashlight in the hand to help dispute the heat generated from the LED. Lower the output if you find the flashlight too warm to hold.
  8. Frequency: Standard strobe-100%-10Hz, Disorienting strobe-100%-alter between 15 and 6.5Hz, Flash(Hi)-100%-1.7Hz, Flash(Lo)-4%-0.4Hz
  9. When 18650 li-ion battery falls below 2.9V, the LED will flash once every 30 seconds to remind you that the battery is almost out (li-ion protection ic usually shut down the flashlight around 2.7V). Lowering output brightness will extend the runtime and disable the warning until battery voltage drops below 2.9V again..