t_seriest

Technical Specifications

Dimensions

Head Dia.
2.5 inches (62 mm)
Body Dia.
1 inches (25.4 mm)
Length:
9.7 inches (247 mm)
Weight:
14.6 ounces (413 grams) 1a
11.3 ounces (320 grams)1b

Battery Type

  • 2x18650 li-ion
  • 4xCR123A (for backup use)
  • Compatible battery size (each)
    • 18650: (18-18.8mm/65-68.5mm)
    • 123A: (16-16.8mm/34-34.5mm)
  • Only use the built-in charger to charge EAGTAC original 7.4V battery pack (more)
  • Read battery safety precaution

Operating voltage

  • 2.7V - 12V6
  • Read more about operating with individual or non-rechargeable batteries

What's included

  • GX25L2 Turbo flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • Rechargeable models comes with 7.4V battery pack and spare waterproof charging cap

All models

  • Non-rechargeable:
    • Base model
      • GX25L2T NR flashlight, w/ smooth aluminum bezel (no front attachment thread)
  • Rechargeable:
    • Base model
      • GX25L2T R flashlight, w/ smooth aluminum bezel (no front attachment thread), w/ built-in li-ion rechargeable port, 7.4V li-ion R18 battery pack (upgradable to R22 battery pack), battery isolation disk

    • YRGB Kit
      • Same as rechargeable base model, but with aluminum bezel (w/ front attachment thread), stainless steel bezel, ET54 diffuser, yellow filter, green filter, blue filter, red filter, rigid nylon holster w/ self-retention device, 12W AC-DC adapter (US/EUR), Automobile 12V DC adapter

    * For base rechargeable model, you need to purchase separate EAGTAC 12W AC-DC adapter (standard 5.5mm/2.1mm positive center pin), or 12V car DC adapter to charge the flashlight.

Battery Pack

  • IC protected, prevents over-charge, over-discharge, short circuit
  • 7.4V li-ion battery pack (R18)
    • 2500mAh capacity, 18.5Wh
  • 7.4V li-ion battery pack (R22) - Optional
    • 3100mAh capacity, 22.9Wh
    • Authentic Japanese cells

Accessories / Spare parts

  • 7.4V li-ion battery packs (R18/R22)
  • Miniature AC-DC adapter
    • 100V-240V to 12V@1A, 12Watts
    • US version - UL certified, PSE certified
    • European version - TUV/CE certified
  • 12V Automobile DC adapter
  • Regular (GX25L2) reflector head w/ protective end cap
  • Aluminum filter housing w/ flip-over head
  • YGRB filter and diffuser lens
  • Rigid nylon holster w/ self-retention device
  • Lens

LED

  • Cool White
    • CREE XM-L2 U4 LED
  • Neutral White
    • CREE XM-L2 U2 LED

    Max output

    • LED lumen: 1397
    • ANSI FL-14 lumen: 1147

    Beam Profile


  • XM-L2 U2
    • Center lux: 57,400 lux
    • Center spot angle: 5.7°
    • Spill light angle: 53.1°
    • Beam distance: 524 yards / 479 meters

    Lens

    • Waterwhite glass lens w/ harden treatment
    • Anti-reflective (AR) coating on both side (96% transparency)

    LED circuit

    • C3500 SEL
      • Synchronous buck w/ efficiency of up to 95%
      • Non-dimming constant current regulation for all output levels
      • Very low standby current (uA)
      • Turbo boost technology5

    Charging circuit

    • 1300SW
      • Highly efficient buck switch
      • Accepts input from 10V to 12V
      • Compatible with 12V automobile DC socket
      • Constant current and constant voltage charging method
      • Fast charge to 52%/42% in one hour (R18/R22)
      • Three hours safety timer w/ charging indicator (more)

    Reflector

    • Smooth aluminum reflector

    Material

    • HAIII hard anodization aerospace aluminum

    Waterproof

    • IPX-8 standard

Output and Runtime

  • Four brightness levels (Regular mode)
    • Led lumen: 13975-1226/638/121/9
    • ANSI FL-1 lumen: 11475-1005/522/100/8
    • Runtime: 1.7/4.5/25/150+ hours (R18)
    • Runtime: 2/5.5/30/180+ hours (R22)
  • Two brightness levels (Tactical mode)
    • Led lumen: 13975-1226/201/Strobe I/Strobe II
    • ANSI FL-1 lumen: 11475-1005/165/Strobe I/Strobe II
    • Runtime: 1.7/15 hours (R18)
    • Runtime: 2/18 hours (R22)
  • Seven hidden auxiliary outputs7
    • Strobe/Strobe(Var)/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)

Operations

  • Basic - Turn on the light by press and release the on/off button switch (<0.4s). To turn off the light, press and release the switch again.
  • For momentary on, press and hold the button switch for immediate output.
  • Twist the head to select between four output levels. You can pre-select the desired output level before turning on the flashlight.
  • Instant Turbo output - at any output level, press and hold the flashlight for 100% output. Release the button to return to previous level.
  • Instant Strobe output - at any output level (or off), double press and hold the on/off button switch for strobe output. Release the button to return to previous level (or off).
  • To access auxiliary levels, starting at head tight position (1st level), loosen to 3rd (or 4th level) and tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.
  • Advance (Programmable Features) To switch between tactical and regular mode, turn on the flashlight at 1st level, dial to 2nd level and then back to 1st level for five times within five seconds.

Controls

(Non-turbo models shown)

Carrying method

  • Para-cord lanyard
  • Rigid nylon holster w/ retention device

Other features

  • User replaceable glass lens
  • Power gauge
  • Turbo boost technology
  • Battery reverse polarity protection
  • Tail stand
  • Upgradeable turbo-size head and reflector

Warranty

Battery Safety Precaution

All EAGTAC flashlights are designed to use “button-top?battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.     Back to top

Battery Safety Precaution

Only use the integrated built-in charging socket to charge the original EAGTAC 7.4V battery pack. Charging unbalanced third party 7.4V 18650 battery pack, two individual 3.7V 18650 cells, or non-rechargeable batteries (e.g. 3V CR123A) may result in battery or flashlight damage.

For backup power use (rechargeable models), you can purchase additional EAGTAC 7.4V battery pack. You can also use four CR123A or two individual 18650 batteries (w/ protection board is highly recommended), but keep in mind that you should not charge any non EAGTAC 7.4V battery pack with the integrated charger.     Back to top

Safety charging timer

Our advice that you turn off the flashlight during charging for fast and full charge. Leaving the flashlight on during charge may pause it. The charging circuit uses constant current / constant voltage method to charge the li-ion batteries quickly and safely. The secondary LED turns on in solid blue color during fast charge state. When the battery is full, the indicator turns dim. A built-in countdown timer is implemented to shut off the charging circuit within three hours. User may remove the charger plug shortly after the charging indicator turns dim for immediate usage without waiting for it to turn off completely.

If the battery is nearly drained, it may only reach to 90%+ capacity within the three hours timer due to the “soft charging?feature for safety reasons. To reset the timer, simply remove and re-insert the charging plug anytime during charge. It is not necessary to charge to 100% for every single time unless absolute maximum runtime is needed. Charging to slighly lower voltage will actually prolong battery life.     Back to top

Flashlight Maintenance

Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of EAGTAC synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently.     Back to top

  1. 1) rechargeable edition w/ battery b) non-rechargeable edition w/o battery
  2. All batteries must have protruding top button. All rechargeable li-ion batteries (e.g. RCR123A and 18650) should be equipped with internal protection circuit against over-charge, over-discharge, and short circuit.
  3. Beam output diameter taken at one meter
  4. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight. For O.T.F. lumen, measurement is taken one minute after turning on the flashlight.
  5. Turbo boost technology is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode.
  6. Frequency: Strobe-100%-9Hz, Flash (Hi-100% and Lo-100mA)-1.7Hz