t_seriest

Technical Specifications

Dimensions

Head Dia.
0.9 inches (22.5 mm)
Body Dia.
0.85 inches (22 mm)
Length:
4.8 inches (123 mm)
Weight
2 ounces (60 grams)1

Battery Type

Operating voltage

  • 2.7V - 6V
    • Do not exceed 6V. Do not use two rechargeable CR123A.

What's included

  • D25LC2 Tactical flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • CR123A Battery Magazines
  • Heavy duty nylon holsterwith flip
  • User removable tailcap lanyard ring

Carrying method

  • Para-cord lanyard with quick attachment clip
  • User removable stainless steel pocket clip (Titanium coated)

Waterproof

  • IPX-8 standard

Replaceable items

  • Lens

LED

  • CREE XM-L2 Cool White U4 LED
  • CREE XP-L HI Cool White V3 LED
  • CREE XM-L2 Neutral White U2 LED
  • CREE XP-L HI Neutral White V2 LED

Max output

  • CREE XM-L2 U4 LED
    • LED lumen: 1374
    • ANSI FL-14 lumen: 1042
  • CREE XM-L2 U2 LED
    • LED lumen: 1200
    • ANSI FL-14 lumen: 910
  • CREE XP-L HI V3 LED
    • LED lumen: 1160
    • ANSI FL-14 lumen: 915

Beam Profile

  • CREE XM-L2 U4 LED

    • Center lux: 9,500 lux
    • Center spot angle: 11°
    • Spill light angle: 64°
    • Beam distance: 213 yards / 195 meters


  • CREE XP-L HI V3 LED

    • Center lux: 18,200 lux
    • Center spot angle: 5.2°
    • Spill light angle: 62°
    • Beam distance: 294 yards / 270 meters

    Lens

    • Waterwhite glass lens w/ harden treatment
    • Anti-reflective (AR) coating on both side (96% transparency)

    LED circuit

    • C3200L TAC
      • Ultra low dropout voltage (<0.2V) for longer current regulated runtime using single 18650 battery
      • High switching frequency (1MHz) controller for more compact circuitry design
      • Low internal resistance design offers up to 99% efficiency7
      • Non-dimming constant current regulation for all output levels
      • Zero standby current
      • Energy saving feature5

    Reflector

    • Very light textured aluminum reflector

    Material

    • HAIII hard anodization aerospace aluminum

    Output and Runtime

    • Regular mode - 3 brightness levels
      • Led lumen:
        13745-1122/584(220)/118(10)
      • ANSI FL-1 lumen:
        10425-853/469(174)/92(8)
      • User programmable lower med and lower low levels
      • Runtime:
        • 1.5/3.5(8)/20(200) hours (1x18650)6
        0.8/2(5)/12(120) hours (2xCR123A)
    • Tactical mode - 2 brightness levels + strobe (newly added)
      • Led lumen:
        13745-1122/390/Strobe
      • ANSI FL-1 lumen:
        10425-853/308/Strobe
      • Features variable frequency strobe
      • Runtime:
        • 1.5/5.5 hours (1x18650)6
        0.8/3.8 hours (2xCR123A)

    Operations

    • Tactical forward clicky switch
      • Turn on the light by pressing the tailcap button until it clicks.
      • For momentary on function, slightly press the tailcap button
      • Twist the head to select between three output levels.
      • You can pre-selected output level before turning on the light.
      • Cycle through auxiliary modes: tight the head (1st level), and loose the head (3rd level) and then tight the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loose the head to quit.
      • To toggle the tailcap instant strobe output, turn the head to 1st level, and then switch on the flashlight on and off for 20 times.
      • To toggle between the regular and tactical mode, turn the head to 2rd level, and then switch on the flashlight on and off for 20 times. (newly added)
      • To toggle the lower med and lower low level, turn the head to 3rd level, and then switch on the flashlight on and off for 20 times. (newly added)

    Controls

    Other features

    • LED direct soldering on copper for maximum heatsink ability
    • User replaceable glass lens
    • Battery reverse polarity protection
    • Ultra low internal resistance phosphor bronze springs (silver coated)
    • Spring loaded positive and negative terminal

    Warranty

    Battery Safety Precaution

    NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries. All EAGTAC flashlights are designed to use “button-top?battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight. Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.     Back to top

    Flashlight Maintenance

    Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of EAGTAC synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently.     Back to top

    1. This weight measurement does not include batteries
    2. All batteries must have protruding top button.
    3. Beam output diameter taken at one meter
    4. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight. For O.T.F. lumen, measurement is taken one minute after turning on the flashlight.
    5. Energy saving feature reduce the maximum output current from 100% to 80% after 200 seconds at turbo output.
    6. Runtime is measured with energy saving feature enabled using three EAGTAC 3400mAh batteries.
    7. Maximum efficiency occurs when input voltage is very close to LED forward voltage.