g_seriest

Technical Specifications

Dimensions

Head Dia.
0.9 inches (22.5 mm)
Body Dia.
0.85 inch (22 mm)
Length:
4.7 inches (119 mm)
Weight:
1.7 ounces (50 grams)1

Battery Type

  • 2xCR123A or 1x18650 li-ion2
  • Do not exceed 6V or use two rechargeable CR123A
  • Compatible battery diameter/length
    • 123A: (16-16.8mm/34-34.5mm)
    • 18650: (18-18.8mm/67-68.5mm)
  • Read battery safety precaution

Operating voltage

  • 2.7V - 6V
  • When using li-ion, 18650 with protection board is highly recommended to protect the battery from over-discharge, as our capable driver can operates down to 2.0V.

Body color

  • Black (HAIII)

What's included

  • Spare O-rings
  • Titanium coated Stainless steel pocket clip
  • User manual
  • Lanyard ring attachment ring
  • Heavy duty nylon holsterw/ self-retention device and flip
  • Mil-Spec paracord lanyard w/ quick attachment clip
  • 2xCR123A battery magazine

Replaceable items

  • Lens
  • Switch module

LED

  • CREE XM-L Color
  • Red (625nm), royal blue (530nm), green (455nm), and white (6000K) color in one LED

Max output

  • Cool White:
    • LED lumen: 331
    • ANSI FL-16 lumen: 261
  • Red/Royal Blue/Green:
    • LED lumen: 120/45/240
    • ANSI FL-16 lumen: 95/37/190

Beam Profile

  • White Led
    • Center lux: 900 lux7
    • Center spot angle: 26°
    • Spill light angle: 48°
    • Beam distance: 66 yards / 60 meters

  • Red/Roayl Blue/Green beamshot

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

Circuit

  • L1600x4
    • Buck-Boost circuit w/ efficiency of up to 96%
    • Auto transition between step down and step up to allow flat current regulation of down to 2.7V input voltage or lower
    • Four independent output channels for individual LED color
    • Non-dimming constant current regulation for all output levels without flicking
    • Turbo boost technology

Optics

  • Optical grade internal focus optics

Material

  • HAIII hard anodization aerospace aluminum

Waterproof

  • IPX-8 standard

Carrying method

  • Titanium coated stainless steel pocket clip
  • paracord lanyard with detachable lanyard holder
  • Rigid nylon holster w/ self retention device and flip

Other features

  • User replaceable glass lens
  • Battery reverse polarity protection
  • User removable pocket clip

Output and Runtime

  • Three brightness levels
    • Led lumen
      • 33110-262/105/9 (White)
      120-99/47/10 (Red)
      45-36/15/2 (Royal Blue)
      240-190/88/8 (Green)

    • ANSI FL-1 lumen:
      • 26110-210/84/7 (White)
      95-79/37/8 (Red)
      37-29/12/1 (Royal Blue)
      190-152/71/6 (Green)

    • Runtime (White/Royal Blue/Green)
      • 1.5/6/120+ hours (2xCR123A)
      1.8/10/200+hours (1x18650)

    • Runtime (Red)
      • 2.3/8/30+ hours (2xCR123A)
      4/12/80+hours (1x18650)
  • Eight hidden auxiliary outputs
    • Strobe/Disorienting strobe/Flash(Hi)/S.O.S.(Fast)/S.O.S./Beacon/Flash(Lo)/Red-Blue Strobe9

Operations

  • Tactical forward clicky switch
  • Basic
    • Turn on the light by pressing the tailcap button until it clicks.
    • Twist the head to select between three output levels.
    • You can pre-selected output level before turning on the light.
  • Advanced
    • Change the LED color: Loose the head (3rd level), tight the head (1st level), and then loose the head (3rd level) within one second to change the LED color. Flashlight will light up four different color one after another, tight the head anytime to select your desired color. This color will be your default LED color until you reprogram it.
    • Cycle through auxiliary modes: Tight the head (1st level), loose the head (3rd level) and then tight the head (1st level) within one second to access this feature. Repeat it to cycle through all settings. Turn off the light or loose the head to quit.

Controls

Warranty & Maintenance

  • Ten years performance guaranteed warranty
  • Proper maintenance goes a long way to ensure your light to serve in the toughest environment and years to come.
  • Read below to how to keep your D25LC2 Color in top shape.

Battery Safety Precaution

All EAGTAC flashlights are designed to use “button-top?battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.     Back to top

Flashlight Maintenance

Cleaning: Periodically clean the thread and o-rings with a lint free cloth. Clean the battery contact, signal contact, thread, and body contact (conductive aluminum area) with a lint free cloth. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently

Lubing: Apply a thin coating of EAGTAC silicon-based lubricant to the o-rings (not the machined thread)and use a small drop of Deoxit red cleaner solution (D series) to slightly lube them for better conductivity and smoother mode switching experience.     Back to top
  1. Weight excluding battery
  2. All batteries must have protruding top button. All rechargeable li-ion batteries (e.g. RCR123A and 18650) should be equipped with internal protection circuit against over-charge,over-discharge, and short circuit.
  3. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight. For O.T.F. lumen, measurement is taken one minute after turning on the flashlight.
  4. Beam output diameter taken at one meter
  5. Energy saving feature, reduce output current by 20% after 200 seconds (at turbo output only)
  6. Frequency: Standard strobe-100%-10Hz, Disorienting strobe-100%-alter between 15 and 6.5Hz, Flash(Hi)-100%-1.7Hz, Flash(Lo)-4%-0.4Hz