EAGTAC - TX25C - EAGTAC.com

New Age TX25C

A big leap forward from its predecessor T10C. The all-new TX25C series is redesigned from ground up. It features a huge 1.3 inch turbo head in a very compact package.

TX25C features boost-buck circuit that takes one or two CR123A cells. It offers industrial leading LED current output and auto-adjusts its MAX output according to battery type used.

Back to top

Ultra high performance

642 to 1177 LED Lumen

Powered by the top binned CREE XM-L2 U4 Cool White LED. You get 642/770/1177 LED lumen when using 1*CR123A/1*RCR123A/2*CR123A (with included extension tube).

150 hours runtime

Get maximum continuous runtime with the lowest output of 43m using two CR123A with extension tube. A single CR123A/RCR123A battery offers 100/50 hours of maximum runtime.

Back to top

Turbo reflector design

194 to 261 yards beam distance

With the new top binned XM-L2 U4 LED, the 3.4 inches long TX25C is able to throw 194 yards with the default single CR123A cell setting. Snap the two cell body on and boost the beam distance to 261 yard.

We use special and custom made machinery tooling to make the deepest reflector possible. Deeper reflector means more reflective surface for converting more spill output into the spot beam.

Back to top

L2800

High efficiency buck-boost circuit

This circuit support any battery type from 1.8V to 6V. Upon inserting the battery, it automatically adjusts output current according to different battery type used.

Crazy high output

This technological advanced 2.4MHz buck-boost controller offers 25% more output power in boost mode compare to D25C clicky and 40% more output power compared to the D25LC2 XM-L2 clicky in step-down mode.

Back to top

Single hand operation

One press for MAX or MIN output

Press and hold the on/off switch button from off for MAX output. Press and release quickly (within 0.3s) to turn on the headlamp at MIN output to preseve your night vision.

Five pre-defined output

Press and hold the on/off switch to toggle between five well defined brightness output. Press and hold for more than 10 seconds to enable 1.5Hz blinking mode.