Ultimate output from two CR123A cells / single 18650
High lumen output
LED lumen
XM-L2 U4 (Cool White): 13501-1042/614/115/9
XM-L2 U2 (Neutral White): 11801-910/536/100/8
ANSI FL-12 lumen
XM-L2 U4 (Cool White): 11051-854/504/97/8
XM-L2 U2 (Neutral White): 9651-746/440/85/7
Smart energy management
1) Energy saving feature (on by default) reduces lumen output by 24% after 200 seconds at turbo mode. With this feature turned off, turbo mode output lumen will be reduced by only 8% instead after 200 seconds. If you wish to turn off this feature, we recommend only do so when you are using 18650 batteries or more than two CR123A for better runtime.
2) ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.
CREE XM-L2 U4 LED
Cool White output
This gives you the maximum brightness output in its class. Our XM-L2 LED offers 1350 LED lumen at turbo mode with industrial leading efficiency (175+ lumen/watt at 700mA current output).
Neutral White output
If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index) compared to cool white LED. Neutral white LED renders color like the sun in the afternoon. XM-L2 U2 Neutral white LED is approximately 7% dimmer than our top bin limited edition U4 cool white LED, but it's well worth it if you prefer the comfortable neutral color tint.
Color temperature choices
Cool White LED
This allows you to view the object with maximum brightness output and gives you maximum beam distance.
Neutral White LED
This gives you better color rendition and more accurate color relative to cool white LED.
Beam distance
The T25C2 beam reaches 300 yards / 275 meters at turbo output with the XM-L2 U4 LED.
Reflector
T25C2 uses polished aluminum reflector with smooth reflective finish for maximum output and far projecting beam. No donut, dark dot, or artifacts inside the beam.
Output color transformer
Red color filter
Low light application.
Yellow color filter
Design to use in rain and fog. Also ideal for caving.
Blue color filter
Low light application. Great for investigation and inspection.
Green color filter
Great for hunting and fishing lighting.
Spot and floody beam
Diffused beam
Use the optional diffused filter to instantly transform between spot and floody beam. The floody diffused beam is great for close up work.