t_seriest

Technical Specifications

Dimensions

Head Dia.
2.5 inches (62 mm)
Body Dia.
2 inches (52 mm)
Length:
5.6 inches (143 mm)
Weight
14.7 ounces (418 grams)1

Battery Type

Operating voltage

  • 10V - 24V
    • All batteries are connected in series. Do not exceed 24V. Do not use rechargeable 3.0v/3.7V RCR123A.

What's included

  • MX30L4-C flashlight
  • Spare o-rings
  • User Manual
  • Mil-Spec Para-cord Lanyard w/ quick attachment clip
  • 4xCR123A Battery Magazines

Two models

  • Base
    • Comes with smooth aluminum bezel
    • Flat tail-stand tailcap
  • Kit
    • Comes with crenulated stainless steel bezel
    • Tailcap w/ switch and tail-standing ability
    • Signal connection through the body tube for rear accessories add-on
    • Heavy duty nylon holsterw/ self-retention device and open-top design
    • Add-on diffuser filter with flip-cover feature

Carrying method

  • Para-cord lanyard with quick attachment clip
  • Heavy duty nylon holster

Waterproof

  • IPX-8 standard

Replaceable items

  • Lens

Reflector

  • 6 * smooth aluminum reflector

Material

  • HAIII hard anodization aerospace aluminum

LED

  • 4 * CREE XP-L HI V3 Cool White LED
  • 4 * CREE XP-L HI V2 Neutral White LED
  • 4 * Nichia 219C 4000K CRI92 R9050 SW40 D240 Neutral White LED

Max output

  • 4 * CREE XP-L HI V3 Cool White LED
    • LED lumen: 4800
    • ANSI FL-14 lumen: 4005
  • 4 * Nichia 219C 4000K CRI92 R9050 SW40 D240 Neutral White LED
    • LED lumen: 3300
    • ANSI FL-14 lumen: 2915

Beam Profile

4 * CREE XP-L HI V3 Cool White LED

  • Center lux: 100,800 lux
  • Center spot angle: 8.6°
  • Spill light angle: 58°
  • Beam distance: 692 yards / 635 meters
4 * CREE XP-L HI V2 Neutral White LED

  • Center lux: 95,100 lux
  • Center spot angle: 8.6°
  • Spill light angle: 58°
  • Beam distance: 672 yards / 617 meters
4 * Nichia 219C 4000K CRI92 R9050 SW40 Neutral White LED

  • Center lux: 49,500 lux
  • Center spot angle: x°
  • Spill light angle: x°
  • Beam distance: 485 yards / 445 meters

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)
  • Multi-layers low color distortation A.R. coating on both side (98% transparency) to prevent reflections and color shadow over wider wavelength - Nichia 219 CRI92 only

LED circuit

  • C7000 HV
    • Current regulated buck driver w/ efficiency of up to 93%
    • Wide voltage input range
    • 48-Watt output
    • Non-dimming constant current regulation for all output levels without flicking
    • Battery level report system
    • Energy saving feature5
    • High voltage mode (>18V) to reduce output lumen by 15% to enhance operational temperature
    • Very low standby current (negligible)

Battery Arrangement

  • Innovative slot load design
  • No battery tray or battery magazine needed
  • Battery arragement design patent pending in United Status, Hong Kong, and China

Battery level report (discharging)

  • A blue LED indicator under the main switch reports the estimated battery remaining capacity after users operated the flashlight
    • Flash once: lower than 20%
    • Flash twice: 20%-40%
    • Flash 3x times: 40%-60%
    • Flash 4x times: higher than 80%

Output and Runtime

  • Five brightness levels
    • Led lumen:
      • 4 * XP-L HI V3:
        48005-3955/2660/1220/207/29
      • 4 * 219C 4000K CRI92 D240:
        33005-2770/1860/866/148/23
    • ANSI FL-1 lumen:
      • 4 * XP-L HI V3:
        40055-3325/2210/1040/179/26
      • 4 * 219C 4000K CRI92 D240:
        29155-2440/1640/762/132/20
    • Runtime:
      • 1.5/2.5/6/35/300+ hours (4x18650) 6
      0.7/1.3/3.1/22/200+ hours (8xCR123A)
  • Three hidden auxiliary outputs7
    • Disorienting Strobe/Beacon (1.67Hz)/S.O.S.

Operations

Basic operations:
  • Turn on the light at MAX output by pressing the BLACK button switch. Turn on the light at LOWEST output by pressing the WHITE button switch
  • To turn off the light anytime, press and release the BLACK button switch.
Advanced:
  • For MAX output momentary on, press and hold the BLACK button switch for immediate output.
  • To switch between different brightness levels, press and release the WHITE button switch when the flashligh is on.

    (For example: if you want to turn on the flashlight at the 3rd level, just press and release the white button switch three times from off.)
  • To enter hidden auxiliary levels, press and hold the WHITE button switch for 5 seconds when the flashligh is on.
  • For instant MAX output - at any output level, press and hold the BLACK button switch. Release the button to return to previous level.
  • For instant Strobe output - at any output level (even) off), double press and hold the BLACK button switch. Release the button to return to previous level (or off).
  • The optional switch button located at the tailcap is treated as the secondary BLACK switch button.


Controls

Other features

  • LED star boards are bolted onto the heatsink for maximum heat transfer ability
  • User replaceable glass lens
  • Battery reverse polarity protection
  • Ultra low internal resistance phosphor bronze springs (silver coated)
  • Spring loaded positive and negative terminal
  • Tail stand
  • Tail-cap w/ switch for kit model

Warranty

Battery Safety Precaution

Ensure the protective circuit on the 18650 batteries has current limitation of higher than 5A. Always use proven EAGTAC batteries for best performance and reliability.

All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.

NiMH rechargeable battery may release gas during discharge. If you experience an inflated switch boot or find high pressure being built inside the flashlight, switch off the flashlight immediately. Slowly loosen the tail-cap to reduce the internal pressure and replace all batteries.     Back to top

Flashlight Maintenance

Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of EAGTAC synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently.     Back to top

  1. This weight measurement is based on the Kit model excluding batteries
  2. All batteries must have protruding top button.
  3. Beam output diameter taken at one meter
  4. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight measured in a calibrated integrated sphere. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel.
  5. Energy saving feature reduce the maximum output current from 100% to 85% after 200 seconds at turbo output.
  6. Runtime is measured using three EAGTAC 3500mAh high discharge 18650 li-ion batteries.
  7. Maximum efficiency occurs when input voltage is very close to LED forward voltage.
  8. At 100% output level, it is possible for the LED indicator to flash three times with freshly charged battery. This is normal as the input current draw from a cold startup flashlight is very high (higher input draw from battery = lower underload battery voltage).
  9. The charging board requires the battery to be lower than 12V in order to start charging. User can force the flashlight to charge without this constraint by turning on the flashlight at MAX output (charging circuit will read lower underload voltage).