t_seriest

Technical Specifications

Dimensions

Head Dia.
2.4 inches (62 mm)
Body Dia.
1.5 inches (37 mm)
Length:
10 inches (254 mm)
Weight:
15 ounces (426 grams)
w/o battery
26 ounces (723 grams)
w/ battery

Battery Type

Operating voltage

  • 2.7V - 4.2V

What's included

  • MX30L2-R flashlight
  • 3.7V 13000mAh li-ion battery pack, IC protected (15A discharge)
  • USB charging cable w/ 2.5 foot AWG22 copper wire
  • Stainless steel bezel
  • Rigid nylon holster w/ self-retention device
  • Spare o-rings
  • User Manual
  • Spare waterproof charging cap

Carrying method

  • Heavy duty nylon holster

Waterproof

  • IPX-8 standard

Replaceable items

  • Lens

Optional accessories

  • 2x32650 3.7V 13000mAh li-ion battery pack (15A discharge)
  • 12V car charger adapter w/ 6 foot heavy duty high current cord
  • ET54II Diffuser filter w/flip cover
  • ET54II Red/Green/Blue filter w/flip cover
  • Para-cord lanyard with quick attachment clip
  • Lens

LED

  • CREE XHP70.2 P2 Cool White LED
  • CREE XHP70.2 N4 Neutral White LED

Max output

  • CREE XHP70.2 P2 Cool White LED
    • LED lumen: 4500
    • ANSI FL-14 lumen: 3780

Beam Profile

  • CREE XHP70.2 P2 Cool White LED
    • Center lux: 60,500 lux3
    • Center spot angle: 8°
    • Spill light angle: 60°
    • Beam distance: 536 yards / 492 meters

Lens

  • Waterwhite glass lens w/ harden treatment
  • Anti-reflective (AR) coating on both side (96% transparency)

LED circuit

  • W3900
    • Synchronous boost converter with ultra low resistance power mosfet which offers up to 96% efficiency and high voltage LED output
    • Uses eight large capacity MLCC for input and output decouple
    • Four layers FR-4 PCB for better heat transfer, lower EMC, and higher output power
    • Uses large molded power inductor for higher saturation current and less electromagnetic interference
    • Current regulated output (non-PWM) for all brightness levels without flicking
    • Low voltage output step-down at 3.0V (lowers MAX output to second lowest level to extend remaining runtime)
    • Built-in shut down voltage at 2.7V
    • Active thermal management feature (adjustment range 40%-100%)5
    • Very low standby current (negligible)

Charging circuit

  • C2500
    • Charges with any 5V 2A/2A+ USB adapter
    • Charges with 12V car charger (optional)
    • Highly efficient step-down charging IC
    • Voltage input 5V - 15V
    • Constant current and constant voltage charging method
    • High 2.4A charging current
    • Very high charging voltage accuracy (1%)
    • Small current charge for low voltage battery
    • No trickle charge when battery is full
    • Uses durable molded power inductor
    • TVS diode protection against input voltage spike

Reflector

  • Aluminum reflector in smooth coating

Material

  • HAIII hard anodization aerospace aluminum

Battery level report

  • A blue LED indicator under the main switch reports the estimated battery remaining capacity
    • Flash once: lower than 30%
    • Flash twice: 30%-50%
    • Flash 3x times: 50%-70%
    • Flash 4x times: higher than 70%

Charging level report

  • A blue LED indicator under the main switch reports current charging level
    • Flash once: lower than 50%
    • Flash twice: 50%-75%
    • Flash 3 times: >75%
    • Constant on: 100% (done)

Output and Runtime

  • CREE XHP70.2 P2 Cool White LED
    • Led lumen:
      45005-2070/2070/1000/280/35
    • ANSI FL-1 lumen:
      37805-1780/1780/860/240/30
    • Runtime:
      1.3-3.2/3.4/7.2/31/300 hours6
  • CREE XHP70.2 N4 Neutral White LED
    • Led lumen:
      41855-1925/930/260/32
    • ANSI FL-1 lumen:
      35155-1655/1655/800/225/28
    • Runtime:
      1.3-3.2/3.4/7.2/31/300 hours6
  • Three hidden auxiliary outputs7
    • Disorienting Strobe/Beacon (1.67Hz)/S.O.S.

    Operations

    Basic operations:
    • Turn on the light at MAX output by pressing the BLACK button switch.
    • Turn on the light at LOWEST (programmable) output by pressing the WHITE button switch
    • To turn off the light anytime, press and release the BLACK button switch.
    Advanced:
    • To program the startup output level, switch to the desired output level and continuously pressing and holding the button for three seconds until the side LED turns on.
    • (Flashlight w/ programmable feature) In rare occasion user may experience the absence of lowest output level from a brand new purchase. If this is case, set the programmable startup level once will initialize the memory setting and will take care of this issue once and for all.
    • For MAX output momentary on, press and hold the BLACK button switch for immediate output.
    • To switch between different brightness levels, press and release the WHITE button switch when the flashligh is on.
    • To enter hidden auxiliary levels, cycle through at least two cycle of regular output.
    • For instant MAX output - at any output level, press and hold the BLACK button switch. Release the button to return to previous level.
    • For instant Strobe output - at any output level (even) off), double press and hold the BLACK button switch. Release the button to return to previous level (or off).


    Charging:8
    • Remove the waterproof silicon cap and insert the charging power plug to charge.
    • Blue side LED indicates the battery is being charged. It reports charging percentage by blinking.

    Controls

    Other features

    • LED Copper MCPCB star board with DTP technology and direct heat path
    • User replaceable glass lens
    • Power gauge
    • Ultra low internal resistance phosphor bronze springs (silver coated)
    • Spring loaded positive and negative terminal
    • Battery reverse polarity protection
    • Tail stand

    Warranty

    Battery Safety Precaution

    Ensure the battery and protective circuit on the battery support 15A and up discharge. Always use proven EAGTAC batteries for best performance and reliability.

    All EAGTAC flashlights are designed to use button-top battery (battery with protruding positive terminal). For rechargeable li-ion battery, use only EAGTAC li-ion battery, or other protected li-ion battery with compatible length and diameter. Before using the battery, check and ensure the battery outer wrapping (the isolating plastic film that wraps around the metal housing of the battery) is complete. Broken battery wrapping may lead to short circuit and damage to the flashlight.

    Lithium and Li-ion battery can explode or cause burns if disassembled, shorted, or exposed to high temperature. Do not mix new and used batteries. Do not mix batteries with different brand, capacity, voltage, or install batteries backwards.    Back to top

    Flashlight Maintenance

    Periodically clean the threads and o-rings with a lint free cloth and apply a thin coating of EAGTAC synthetic grease to the o-rings and threads. After prolonged exposure to moisture, the head and batteries should be removed, inspected, and dried. Do not touch or attempt to clean the reflector, as it will scratch the reflective coating permanently.     Back to top

    View all MX30L2-R accessories


    1. Includes batteries
    2. Protected li-ion battery with protruded top must be used in this flashlight
    3. Beam output diameter taken at one meter
    4. ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight. For O.T.F. lumen, measurement is taken one minute after turning on the flashlight.
    5. After 30 seconds at maximum output level (100%), the active thermal management feature will be activated and continuously adjusts the maximum output level according to the flashlight internal tempearture. The adjustment output range is between 40%-100%. It's normal for high power flashlight to run hot at MAX level. Reduce the output if the user finds the flashlight too warm to hold.
    6. Runtime is measured using EAGTAC 2x32650 3.7V 13000mAh battery pack
    7. Maximum efficiency occurs when input voltage is very close to LED forward voltage.
    8. To charge a deeply discharged protected li-ion battery, the flashlight internal charging circuit will use small current to charge the battery. Usually it takes at least a few minutes for the charging circuit to bring the deeply discharged battery voltage to higher than 3.0V (which is the no-load voltage required to disable the over-charge lock-out on the battery protection circuit). If the protected li-ion battery fails to activate, contact our customer services about your situation and we may find other ways to activate it.