EAGTAC - D25 Clicky Ti - Output

The unique beauty of Titanium

Titanium has the highest strength-to-weight ratio of any metal and superb corrosion resistance, making it ideal for the material choice for our limited edition pocket flashlights.

The D25 clicky Ti is machined from titanium rod and brass cube with CNC and hand polished to mirror-like finish. Order your personal copy now from your EAGTAC dealer before they are gone.

New harden surface treatment

The new titanium alloy surface finish is three times harder than pure titanium, making it a lot better against wear and scratch.

D25C RC TI Max output:
CREE XP-L HD V6 LED: 521 LED lumen
CREE XP-L HI V3 LED: 450 LED lumen
Nichia 219B-V1 CRI92 5700K D220 LED: 300 LED lumen

D25A RC MKII TI Max output:
CREE XM-L2 U4 LED: 405 LED lumen
CREE XP-L HI V3 LED: 353 LED lumen
Nichia 219C CRI92 4000K D240 LED: 275 LED lumen

CREE XP-L HI V3, or HD V6 LED, or
Nichia 219B-V1 CRI-92 R9050 5700K LED.

We are offering the highest and latest bin available LED for the D25 clicky Ti for maximum brightness. The XP-L HD V6 LED offers maximum lumen output in its class. The new Nichia 219C D240 boosts maximum CRI to 92 and offers very pleasant color output.

What's special?

New body style
LED soldered directly on copper for direct heatsink
Solid brass heatsink
Titanium built and glossy polished finish
Features very smooth thread
A750RC and A950RC III circuit w/ dimmable output with li-ion
Programmable last mode memory and moonlight settings
Pre-select output before turning on
White switch boot mixed with glow-in-the-dark powder
Harden surface treatment

EAGTAC D25C Clicky Ti Download HD pics

CR123A/RCR123A flashlight for titanium collectors.
Uses XP-L HI/HD LED, or Nichia 219 5700K CRI-92 LED.

1/32/294/450 LED lumen (XP-L HI V3)
0.5/23/220/330 ANSI FL-1 lumen (XP-L HI V3)
4,200 lux @ 1 meter | Beam distance: 141 yards (130 meters)
Runtime: 0.9/1.6/10/150+ hours
Twist head for group output, clicky switch for on/off and modes
Compatible with RCR123A li-ion Battery fitment | MRSP: $82

Operations: (Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs. (Advance) 1) Moonlight output - dim or increase the entire output range of the group 1 output. Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times. 2) Mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times. Read more here.

EAGTAC D25A Clicky MKII Ti Download HD pics

AA/14500 flashlight. Must have for titanium collectors.
Uses XP-L HI/HD LED, or Nichia 219C CRI-92 LED.

2/15/199/353 LED lumen (XP-L HI V3)
2/11/145/260 ANSI FL-1 lumen (XP-L HI V3)
Runtime: 1/2.2/35/150+ hours
2,050 lux @ 1 meter | Beam distance: 99 yards / 91 meters)
Twist head for group output, clicky switch for on/off and modes
Compatible with 14500 li-ion Battery fitment | MRSP: $80

Operations: (Basic) Press on the switch button until it clicks to switch on. Press the switch again for off. Access output groups 1 & 2 by tighten or loosen the head. Slightly press the switch to switch between different outputs. (Advance) 1) Lower low output -With "Lower low" function disabled, lowest (second lowest) output will increase by about three (two) times. Toggle this setting starting with head loosens, turn on the light, and then repeat tight and loose for three times. 2) Mode memory - remebers the last output in group 1. To toggle this setting, with head tighten, turn on the light, and repeat loose and tight for three times. Read more here. Read more here.

Operations:

D25A MKII TI

D25C TI

* Using 3.7V li-ion significantly increase the LED output and heat. Limit each usage to five minutes or less at high and turbo output. Hold the light in your plam to help removing heat from the LED. If you find the flashlight too warm to hold, turn off the light, or lower the output to allow it to cool down. Do not leave the light running unattended.

* D25A Ti head is made in one piece, and therefore its glass lens is not user replaceable.