Ultimate output from two CR123A cells / single 18650
High lumen output
LED lumen
White: 331-262/105/9
Red: 120-99/47/10
Royal Blue: 45-36/15/2
Green: 240-190/88/8
ANSI FL-12 lumen
White: 261-210/84/7
Red: 95-79/37/8
Royal Blue: 37-29/12/1
Green: 190-152/71/6
Smart energy management
1) Energy saving feature LED current output by 20% after 200 seconds at turbo mode to prolong flashlight runtime.
2) ANSI FL-1 Lumens is a measurement of light output standardized by American National Standards Institute for use with flashlights. This ANSI Lumen measurement is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC’s ANSI Lumen output is measured using a calibrated integrated sphere three minutes after turning on the flashlight.
CREE XM-L Color LED
Cool White output
This gives you the maximum brightness output in its class. Our XM-L2 LED offers 331 LED lumen at turbo mode with industrial leading efficiency.
Neutral White output
If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index) compared to cool white LED. Neutral white LED renders color like the sun in the afternoon. The Neutral white LED is approximately 7% dimmer than its cool white version.
Color temperature choices
Cool White LED
This allows you to view the object with maximum brightness output and gives you maximum beam distance.
Neutral White LED
This gives you better color rendition and more accurate color relative to cool white LED.
Beam distance
The D25LC2 Color beam reaches 66 yards / 60 meters at turbo output with its white LED emittor.
Diffused Optics
Since each LED emittor is slighly offset from the center (the nature of this multi-die LED), getting good beam result wasn't easy. Thanks to our custom made diffused optics, we are able to manage the beam profile without dark spot or donut. The beam is a lot brighter and gives higher beam distance than any other type of light reflective method that we've tested. AR coated glass lens is added upfront to protect the optics.