Introducing the D25LC2 Color user interface

Easy and Trusty operation

Switch on and off:
Turn on the light by pressing the tailcap button until it clicks. Slightly press for momentary on/off.

Switching between output
Twist the head to select between four output levels. You can pre-selected output level before turning on the light.



Change LED output color
Loose the head (3rd level), tight the head (1st level), and then loose the head (3rd level) within one second to change the LED color. Flashlight will light up four different color one after another, tight the head anytime to select your desired color. This color will be your default LED color until you reprogram it.



Cycle through auxiliary modes
Tighten the head (1st level), and loosen to 3rd level) and then tighten the head within one second to enter auxiliary setting. Repeat to cycle through all settings. Turn off the light or loosen the head to quit.

Other features

Energy saving feature: D25LC2 Color reduces output by 20% after 200 seconds at turbo mode to prolong runtime.