One of the most powerful two AA cells flashlight available!
Maximum lumen output
LED lumen
XM-L2 U4: 9731/638/79/8
XP-L HI V3: 8401/553/67/7
XP-G2 S3: 5991/412/55/9
Nichia 219 (CRI-92): 4201/287/37/7
ANSI FL-12 lumen
XM-L2 U4: 7111/472/60/7
XP-L HI V3: 6521/445/55/9
XP-G2 S3: 4311/296/39/8
Nichia 219 (CRI-92): 3001/204/26/6
Turbo boost technology
1) Turbo boost technology is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode.
2) ANSI is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC ANSI Lumen output is measured using a calibrated integrated sphere one minute after turning on the flashlight.
Top binned LED
Cool White LED
CREE XM-L2 U4 LED
CREE XP-L HI V3 LED
Neutral White LED
CREE XM-L2 U2 LED
CREE XP-L HI V2 LED
XP-L HI, XM-L2, XP-G2, CREE are registered trademark of CREE Inc. Nichia, 219 are registered trademark of Nichia.
Color tint selection
Cool White LED
This gives you the maximum brightness output in its class and maximum beam distance.
Neutral White LED
If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index). Neutral white LED renders color like the sun in the afternoon. Neutral white LED is approximately 7% dimmer than our top binned cool white LED, but it's well worth the ability to see the real color of your surrounding.This gives you better color rendition and more accurate color relative to cool white LED.
CREE XP-G2 S3 LED
431 ANSI lumen, Good far projecting performance, excellent beam profile
XP-G2 is the best well-balance LED for this flashlight in terms of beam profile, output, far projecting and up close beam performance.
CREE XM-L2 U4 LED
711 ANSI lumen, Fair far projecting performance, excellent (relatively floody) beam profile
(Cool white LED beam profile shown above) Neutral white LED shares the same beam profile as its cool white version.
Nichia 219B SW45 D220 LED
Nichia 219 is currently the only one in the market that offers high 92 CRI in neutral white tint of 5000K. The 219 LED offers very nice smooth beam and gives you the best illuminated object color. We use the highest flux D220 for maximum output.