D25A Clicky

Top binned CREE XP-G S2 LED

One of the most powerful single AA cell flashlight available!

Maximum lumen output

LED lumen

XP-L HI V3: 2001/121/11/1
XM-L2 U4: 2291/139/13/1
XP-G2 S3: 2031/125/14/1
Nichia 219B (CRI-92): 1321/82/10/1

ANSI FL-12 lumen

XP-L HI V3: 1471/88/9/0.5
XM-L2 U4: 1621/97/11/0.5
XP-G2 S3: 1361/85/12/0.5
Nichia 219B (CRI-92): 881/55/7/0.5

Turbo boost technology

1) Turbo boost technology is activated every time you turn on at turbo output setting. It offers 20% more power to the LED for the first 200 seconds at turbo mode.

2) ANSI FL-1 is the total overall light output being emitted from the flashlight. This measurement is generally more accurate as it takes into consideration the loss from reflector/lens/bezel. EAGTAC ANSI FL-1 Lumen output is measured using a calibrated integrated sphere three minute after turning on the flashlight.

Top binned LED

Cool White LED

CREE XP-L HI V3 LED
CREE XM-L2 U4 LED
CREE XP-G2 S3 LED

Neutral White LED

CREE XP-L HI V2 LED
CREE XM-L2 U2 LED
Nichia 219B SW45 D220 LED

XP-L, XM-L2, XP-G2, CREE are registered trademark of CREE Inc. Nichia, 219 are registered trademark of Nichia.

Color tint selection

Cool White LED

This gives you the maximum brightness output in its class and maximum beam distance.

Neutral White LED

If you need awesome beam output out in the woods, or areas with a lot of green vegetation, use our neutral white LED as it offers higher CRI (Color rendering index). Neutral white LED renders color like the sun in the afternoon. Neutral white LED is approximately 7% dimmer than our top binned cool white LED, but it's well worth the ability to see the real color of your surrounding.This gives you better color rendition and more accurate color relative to cool white LED.

CREE XP-L HI V3 LED

147 ANSI lumen, Good far projecting performance, excellent beam profile

XP-L HI is the best well-balance LED for this flashlight in terms of beam profile, output, far projecting and up close beam performance.

Offers up to 550 LED lumen when direct drive with 14500 li-ion battery.

CREE XM-L2 U4 LED

162 ANSI lumen, Fair far projecting performance, excellent (relatively floody) beam profile

Offers up to 803 LED lumen when direct drive with 14500 li-ion battery.

(Cool white LED beam profile shown above) Neutral white LED shares the same beam profile as its cool white version.

Nichia 219B SW45 D220 LED

Nichia 219 is currently the only one in the market that offers high 92 CRI in neutral white tint of 4500K. The 219 LED offers very nice smooth beam and gives you the best illuminated object color. We use the highest flux D220 for maximum output.